Description and features
Enox CH (1,1-Di(tert-butylperoxy)cyclohexane in white oil) is being used in the production of (expanded) polystyrene and SMC/BMC.
Europe: Enox CH-80MO is ➔ on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums.
United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details.
This product (CAS: 3006-86-8) has been registered (FULL) under REACH (EC) 1907/2006.
|HS code||2909 60 00|
|Activation energy||34.6 kcal/mol|
|10 hr. half-life temp||94 °C|
|1 hr. half-life temp||113 °C|
|1 min. half-life temp||153 °C|
|Appearance||Light yellow transparent liquid|
|Assay||78 – 80.0 %|
|Active oxygen||9.58 – 9.84 %|
|Hydroperoxide as TBHP||≥ 0.5 %|
Available packaging: 20 KG PE drums.
Special packaging is available on request.
Store 1-1-di-tert-butylperoxy-cyclohexane cool, dry and well-ventilated area and in line with legal requirements.
Keep Enox CH-80MO away from heat sources and oxidizing agents.
A Material Safety Data Sheets (MSDS) is available for Enox CH-80MO and all other products supplied by Vesta Chemicals BV.
An MSDS describes the hazards of a product and explains how a product can be safely handled, used and stored. Besides it provides important regulatory and emergency response information for the purchased product.
Molecular and structural information
|Molecular weight||164.21 g/mol|
|Boiling point||Decomposes before boiling|
|Relative density||0.884 @ 20 °C|
|Flashpoint||Decomposes before reaching flashpoint|
|Partition coefficient (log Pow)||7.2 @ 25 °C|
|Solubility in water||1.07 mg/L @ 25 °C|
|Vapor pressure||12.3 Pa @ 25 °C|